STARTECH.COM SATDOCK2REU3 CLONE A 2.5IN/3.5IN SATA DRIVE WITHOUT HOST COMPUTER

STARTECH.COM SATDOCK2REU3 CLONE A 2.5IN/3.5IN SATA DRIVE WITHOUT HOST COMPUTER
StarTech.com SATDOCK2REU3 media duplicator HDD/SSD duplicator 1 copies Black
Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 for easy access
The SATDOCK2REU3 USB 3.0 Standalone Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The dock also functions as a standalone drive duplicator and eraser – an efficient and versatile solution for external drive management.
Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing.
With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD/SSD docking station�is compatible with virtually any SATA hard drive, and greatly increases the storage/backup�capabilities�of your computer.
Extend the value of this hard drive docking station further with the addition of our�SAT2IDEADP” text=”SATA to IDE Hard Drive Adapter�(SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock.
The�SATDOCK2REU3 is�backed by a 2-year StarTech.com warranty and free lifetime technical support.
The StarTech.com Advantage
– Quickly copy hard drives, with standalone sector by sector HDD/SSD duplication
– Securely erase up to two drives simultaneously, with Single Pass HDD overwriting
– Hassle-free access to drive data, with hot-swappable top slot-loading dock design that supports both 2.5in and 3.5in HDD/SSDs
StarTech.com Dual Bay USB 3.0 Duplicator and Eraser Dock for 6.35 cm (2.5″) & 8.89 cm (3.5″) SATA SSD HDD – 1:1 Standalone Cloner & Wiper Docking Station (SATDOCK2REU3)
Features:
Product color:
Black
AC input voltage:
100 – 240
Input current:
1.2
Output voltage:
12
Output current:
3
Weight:
424
Package weight:
885
AC adapter included:
Y
Cables included:
AC,USB
Manual:
Y
Operating temperature (T-T):
0 – 85
Storage temperature (T-T):
-10 – 95
Operating relative humidity (H-H):
5 – 90
LED indicators:
HDD,Link,Power
Package height:
130
Package width:
165
RoHS compliance:
Y
Certification:
REACH, CE, FCC
Chipset:
Prolific – PL2775
Product type:
HDD/SSD duplicator
Transfer rate:
11
Duplicator operating modes:
Copy,Erase
Interface:
USB 3.0
Maximum supported storage capacity:
4
Plug and Play:
Y
Plug type:
Type M
Package length:
195
Dimensions (WxDxH):
103 x 128 x 62
Supported HDD sizes:
2.5,3.5
SSD support:
Y
Number of simultaneous copies:
1
USB connector type:
USB Type-B